Canon MB2300 series Online Manual page 590

◦ RX start time
You can specify the length of time until automatic reception is started when Manual/auto switch:
ON is selected. Specify the length of time and tap OK.
◦ User-friendly RX: ON/User-friendly RX: OFF
If you select User-friendly RX: ON, the machine automatically switches from telephone calling to
fax reception by detecting the fax signal (CNG signal) when you lift the handset of the telephone
or the answering machine answers. When you have an answering machine connected to the
machine, select User-friendly RX: ON to switch to fax reception automatically after the answering
machine answers.
If you select User-friendly RX: OFF, the machine does not switch from telephone calling to fax
reception automatically even if the machine detects the fax signal (CNG signal). Select User-
friendly RX: OFF if you want the machine not to switch automatically during a call.
Note
• If you subscribe to Duplex Ringing service in Hong Kong, the number of times the external device
rings specified with Ring count in FAX only mode is available in TEL priority mode.
If you want to specify the number of times the external device rings in TEL priority mode, select
FAX only mode on the Receive mode settings screen, specify the number of times the external
device rings with Ring count, then switch to TEL priority mode in Receive mode settings.
• If you subscribe to Duplex Ringing service in Hong Kong, we recommend that you select Manual/
auto switch: OFF.
• Advanced setting in FAX only mode
You can specify the following setting item.
◦ Ring count
You can specify the number of times the external device rings when incoming.
Specify the number of time and tap OK.
• Advanced setting in DRPD
You can specify the following setting items.
◦ Ring pattern (Normal ring/Double ring/Short-short-long/Short-long-short)
Sets the distinctive ring pattern of a call that the machine assumes is a fax call.
If you subscribe to a DRPD service, set the ring pattern to match the pattern assigned by your
telephone company.
Setting the DRPD Ring Pattern (US and Canada only)
◦ Ring count
You can specify the number of times the external device rings when incoming.
Specify the number of time and tap OK.
• Advanced setting in Network switch
You can specify the following setting item.
◦ Ring count
You can specify the number of times the external device rings when incoming.
590