Device User Settings - Canon MB2300 series Online Manual

Device user settings

Important
• This setting item is for the administrator.
• Date/time setting
Sets the current date and time.
Setting the Sender Information
• Date display format
Sets the format of dates displayed on the touch screen and printed on sent faxes and photos.
Note
• When ON is selected for Print date on the print settings screen in printing from a USB flash drive,
the shooting date is printed in the date display format you selected.
Setting Items for Photo Printing Using the Operation Panel of the Machine
• Daylight saving time setting
Enables/disables the summer time setting. If you select ON, you can select additional sub-settings. This
setting may not be available depending on the country or region of purchase.
◦ Start date/time
Sets the date and time that summer time starts.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to start summer time will be displayed after specifying the items
above and tapping OK.
After specifying the shift time and tapping OK, you can specify the end date/time.
◦ End date/time
Sets the date and time that summer time ends.
Month: Specify the month.
Week: Specify the week.
DOW: Specify the day of the week.
The screen to set the shift time to end summer time will be displayed after specifying the items
above and tapping OK.
Specify the shift time, then tap OK.
• Sound control
Selects the volume.
◦ Keypad volume
Selects the beep volume when tapping the touch screen or the buttons on the operation panel.
◦ Alarm volume
260