Canon MB2300 series Online Manual page 365

Hide thumbs Also See for MB2300 series:

Table of Contents

For Two-Sided, select either Long-Edge binding or Short-Edge binding.

4. Select Margin from the pop-up menu on the Print Dialog

5. Set the stapling margin

If necessary, set the Margin width, and to change the Stapling Side, select a setting from the list.

• Depending on the Two-Sided setting in the Layout pop-up menu, the Stapling Side that can be

selected differs.

6. Complete the setup

Click Print.

When you execute print, duplex printing will be started.

• When a media type other than Plain Paper is selected from Media Type menu of Quality & Media,

duplex printing cannot be executed.

• Duplex printing can be performed only when one of the following paper sizes is selected from Paper

• US Letter, A4

• After printing the front page, there is an ink drying wait time before starting to print the back page

(Operation stops temporarily). Do not touch the paper during this time. You can change the ink drying

wait time from Custom Settings in the Canon IJ Printer Utility.

• When you use duplex printing, the print area becomes slightly smaller than the normal print area.

Table of Contents

Troubleshooting