Forwarding Scanned Data To Shared Folder On The Computer Using The Operation Panel Of The Machine - Canon MB2300 series Online Manual

Forwarding Scanned Data to Shared Folder on the Computer Using
the Operation Panel of the Machine
Before forwarding scanned data on the shared folder on the computer, confirm the following:
• The scanner driver and Canon Quick Toolbox are installed.
If the scanner driver and Canon Quick Toolbox are not yet installed, install them from our website.
• The machine is connected to a computer via a LAN correctly.
• The destination folder is specified in Canon Quick Toolbox.
You can specify the destination folder in Canon Quick Toolbox. For details on settings of Canon Quick
Toolbox:
Destination Folder Settings
Follow the procedure below to forward scanned data to the shared folder on the computer.
1. Make sure that the machine is turned on.
2. Flick the HOME screen, then tap
Using the Operation Panel
The screen for selecting to which you save the data is displayed.
3. Tap Destination folder.
Note
• When the message informing you that the operation restriction is enabled, ask the administrator of
the machine you are using.
For details on the operation restriction of the machine:
About the Machine Administration
4. Tap the folder to save scanned data on the Select folder screen.
Note
• When you specify a PIN code for a registered folder, a screen asking you to enter a PIN code is
displayed. Entering the PIN code allows you to assign the shared folder as the destination.
Scan.
570