Canon MB2300 series Online Manual page 259

Service name
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected devices.
◦ LPR protocol setting
Activates/deactivates the LPR setting.
◦ Wireless LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when using wireless LAN. It allows
you to save electricity.
Note
• Depending on the access point you are using, discontinuous reception may not be activated
even though Enable is selected.
• Discontinuous reception is activated only while the machine is on standby. (The touch screen is
in the screen saver mode.)
◦ Wired LAN DRX setting
Selecting Enable allows you to activate discontinuous reception when the machine is connected to
a device compatible with wired LAN. It allows you to save electricity.
◦ Access point mode settings
When you use the machine as an access point, specify the access point name and the security
setting.
Using the Machine with the Access Point Mode
259