General Control - Pioneer X-HM20V-s Operation Manual

Changing the setup menu (continued)
n Parental setting
1 Select "PREFERENCE" on the setup menu screen (see
steps 1 - 4 on page 13).
2 After selecting "PARENTAL" in step 4 on page 13, select
the parental level and press the ENTER button.
3 Enter a 6-digit password using the Numeric buttons and
press the ENTER button.
* If this is the first time, enter "000000".
Indicator
1 KID SAFE Only DVD software intended for children
can be played back.
2 G to 7 NC- Only DVD software intended for general
17 use and children can be played back.
8 ADULT DVD software of any grade (adult/
general/children) can be played back.
Note:
Whilst playing a disc with parental lock, the display may
appear requesting a password in order to watch some
restricted scenes. In such case, enter the password to
temporarily change the parental level.
n Password setting
From the setup menu, select "PREFERENCE",
"PASSWORD" and then "CHANGE". A screen appears.
GENERAL AUDIO DOLBY VIDEO PREFEREN.
- - PREFERENCE PAGE - -
TV TYPE PAL
AUDIO
ENG
SUBTITLE
ENG
DISC MENU
ENG
PARENTAL
PASSWORD
DEFAULT
PASSWORD
1 Enter the old password using the Numeric buttons.
(If this is the first time, enter "000000").
2 Enter the new password using the Numeric buttons.
3 Enter the new password again for confirmation.
4 Press ENTER button again to confirm password
changed.
Note:
When you forget your password, follow below
l
sequence.
At setup menu, select "PREFERENCE",
l
"PASSWORD" and then "CHANGE".
1 Enter the old password as "000000" using the Numeric
buttons.
2 Enter the new password.
3 Enter the new password again for confirmation.
Setting
GENERAL AUDIO DOLBY VIDEO PREFEREN.
- - PASSWORD SETUP PAGE - -
PASSWORD MODE ON
PASSWORD CHANGE
CHANGE PASSWORD
GENERAL AUDIO DOLBY VIDEO PREFEREN.
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
PASSWORD
En-17

General control

STANDBY/ON
BASS/TREBLE
P.BASS
MUTE
n To turn the power on
Press the STANDBY/ON button to turn the power on.
After use:
Press the STANDBY/ON button to enter the power
stand-by mode.
n Display brightness control
To dim the display brightness, press the DIMMER button
on the remote control.
Dimmer 1 (Display is dim).
(Display gets dimmer).
Dimmer 2
(Display is bright).
Dimmer Off
n Volume auto set-in
If you turn off and on the main unit with the volume set to
17 or higher, the volume starts at 16.
n Volume control
Turn the volume knob towards VOLUME (on main unit) or
press VOL +/– (on remote control) to increase or decrease
the volume.
n Auto power on function
When you press any of the following buttons, the unit turns
on.
iPod/iPhone, DVD/CD, USB, LINE, TUNER on the
l
remote control: Selected function is activated.
/ button on the main unit: The unit turns on and
l
playback of the last function will start (DISC, Tuner,
USB Audio, USB Video, iPod, Line In).
VOLUME
DIMMER
MEMORY/FOLDER
+
DVD/CD
VOL