Pioneer X-HM20V-s Operation Manual page 3

Information to User
Alterations or modifications carried out without appropriate authorization may invalidate the user s right to operate
the equipment.
CAUTION
This product is a class 1 laser product classified under the Safety of laser products, IEC 60825-1:1993 + A1:1997 +
A2:2001, but this product contains a laser diode higher than Class 1. To ensure continued safety, do not remove any
covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
The following caution label appears on your unit.
Location: Inside of the unit
Condensation
If the player is moved suddenly from a cold place into a
warm room (in winter, for example) or if the
temperature in the room in which the player is installed
rises suddenly due to a heater, etc., water droplets
(condensation) may form inside (on operating parts and
the lens). When condensation is present, the player will
not operate properly and playback is not possible. Let
the player stand at room temperature for 1 or 2 hours
with the power turned on (the time depends on the
extent of condensation). The water droplets will
dissipate and playback will become possible.
Condensation can also occur in the summer if the
player is exposed to the direct wind from an
air-conditioner. If this happens, move the player to a
different place.
"Made for iPod," "Made for iPhone," and "Made for
iPad" mean that an electronic accessory has been
designed to connect specifically to iPod, iPhone, or
iPad, respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and regulatory
standards. Please note that the use of this accessory
with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone and iPod are trademarks of Apple Inc.,
registered in the U.S. and other countries.
S005_A1_En
En-3
D8-10-2_A1_En
B