General Control; Setting The Clock (Remote Control Only) - Pioneer x-hm50-k Operating Instructions Manual

General control

n To turn the power on
Press the STANDBY/ON button to turn the power on.
After use:
Press the STANDBY/ON button to enter the power stand-by mode.
Note:
However, if iPod/iPhone is docked, the unit will begin charging.
"iPod charge" will be displayed.
n Display brightness control
To dim the display brightness, press the DIMMER button on the
remote control.
(Display is dim).
Dimmer 1
(Display gets dimmer).
Dimmer 2
(Display is bright).
Dimmer off
n Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or higher,
the volume starts at 16 and fades in to the last set level.
n Volume control
Turn the volume knob towards VOLUME (on main unit) or press VOL
+/– (on remote control) to increase or decrease the volume.
n Auto power on function
When you press any of the following buttons, the unit turns on.
l iPod / iPhone, CD, USB, AUDIO / LINE (INPUT), TUNER (BAND)
on the remote control: Selected function is activated.
/ button on the main unit: The unit turns on and playback of
l
the last function will start (CD, TUNER, USB, iPod, AUDIO IN,
LINE IN)
n Auto power off function
The main unit will enter the stand-by mode (when iPod/iPhone is not
docked) after 15 minutes of inactivity during:
iPod/iPhone: No connection or in the pause mode.
CD / USB: In the stop mode.
n Muting
The volume is muted temporarily when pressing the MUTE button on
the remote control. Press again to restore the volume.
INPUT
VOLUME
STANDBY/ON
TIMER
INPUT
PHONES AUDIO IN USB
X-HM50
En-9
n Extra-Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasises the bass frequencies. To cancel the extra
bass mode, press the EXTRA BASS button on the remote control.
n Bass control
1
Press the BASS/TREBLE button to select "Bass".
2
Within 5 seconds, press the VOL (+ or –) button to adjust the bass.
n Treble control
1
Press the BASS/TREBLE button to select "Treble".
2
Within 5 seconds, press the VOL (+ or –) button to adjust the
treble.
n Equaliser
When the EQUALIZER MODE
button is pressed, the current
mode setting will be displayed.
To change to a different mode,
press the EQUALIZER MODE
button repeatedly until the
desired sound mode appears.
n Function
When the INPUT button on main unit is pressed, the current function
will change to different mode. Press the INPUT button repeatedly to
select desired function.
FM STEREO
CD
Audio In
Line In
Note:
The backup function will protect the memorised function mode for a
few hours should there be a power failure or the AC power lead
becomes disconnected.

Setting the clock (Remote control only)

In this example, the clock is set for the 24-hour (00:00) display.
1
Press the STANDBY/ON button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the ENTER button. To adjust the day,
press the or button and then press the ENTER button.
4
Press the or button to select 24-hour or 12-hour display
and then press the ENTER button.
The 24-hour display will appear.
(00:00 - 23:59)
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 00:00 - PM 11:59)
No equalization.
Flat Equaliser off.
For rock music.
Game For game.
For classical music.
Classic
For classical music.
Pops For pop music. For pop music.
Vocals are enhanced.
Vocal Vocals are enhanced.
For jazz.
Jazz For jazz.
FM MONO AM
iPod USB