Contents - Pioneer X-HM20V-s Operation Manual

Table of Contents

Advertisement

System Connection (continued)
n AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket.
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
Caution:
Handle the power cord by the plug part. Do not pull out
l
the plug by tugging the cord, and never touch the
power cord when your hands are wet, as this could
cause a short circuit or electric shock. Do not place the
unit, a piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never make a
knot in the cord or tie it with other cables. The power
cords should be routed so that they are not likely to be
stepped on. A damaged power cord can cause a fire or
give you an electric shock. Check the power cord once
in a while. If you find it damaged, ask your nearest
Pioneer authorized independent service company for a
replacement.
Do not use any power cord other than the one supplied
l
with this unit.
Do not use the supplied power cord for any purpose
l
other than that described above.
n Connect your TV (Enjoying DVD or iPod
video)
For better quality, you can also connect with S-video using
the S-VIDEO OUT jack.
If your TV also has a component video input or HDMI
input, you can connect this too.
Using the component video jacks:
Component video should deliver superior picture quality
when compared to composite video. A further advantage
is progressive-scan video, which delivers a very stable,
flicker-free picture. See the manuals that came with your
TV to check whether they are compatible with progressive-
scan video.
Using HDMI terminal:
If you have an HDMI or DVI (with HDCP) equipped TV, you
can connect it to this receiver using a commercially
available HDMI cable.
Note:
If the video signal does not appear on your TV, try
adjusting the resolution settings on your TV. Note that
some video contents have resolutions that may not be
displayed. In this case, use a (analog) composite
connection.
3
AC IN
S-video cable
(commercially
available)
HDMI cable
(commercially
available)
En-11
LINE
AUX
LOOP
COMPONENT VIDEO
S-VIDEO
HDMI
COAXIAL
Component
video cable
(commercially
available)
TV

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents