Introduction; Safety Information; Safe Working Practices - Fluke 106 User Manual

Introduction

The Fluke 106 and 107 Multimeters (the Product) are 6000 count instruments.
The Product is battery powered with a digital display.
Except where noted, the descriptions and instructions in this Users Manual apply to both the
106 and 107.
Unless otherwise identified, all illustrations show the 107.

Safety Information

The Fluke 106 and 107 comply with IEC 61010-1 CAT III 600 V overvoltage standard. See
Specifications.
A Warning identifies conditions and procedures that are dangerous to the user. A Caution
identifies conditions and procedures that could cause damage to the Product or the
equipment under test.
International electrical symbols used on the Product and in this manual are explained in Table 1.
106 & 107
Users Manual

Safe Working Practices

Review the safety information and comply with the safe working practices.
To prevent possible electrical shock, fire, or personal injury:
• Carefully read all instructions.
• Read all safety information before you use the Product.
• Use the Product only as specified, or the protection supplied by the Product
can be compromised.
• Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
• Do not use and disable the Product if it is damaged.
• Do not use the Product if it operates incorrectly.
• Examine the case before you use the Product. Look for cracks or missing
plastic. Carefully look at the insulation around the terminals.
2
Warning
1