Operation
Maintenance
Setting the date for special works
You can enter appointments for exhaust
gas analysis and general inspection using
the maintenance system.
Switch on the ignition ( page 34).
The standard display of the control sys-
tem appears ( page 153).
Press button k or j on the mul-
tifunction steering wheel until the
maintenance indicator appears in the
multifunction display.
Press the reset button ( page 24) for
about five seconds.
The
Service menu
appears in the multi-
function display.
342
Select the
Addit. Work
menu with the
+ or - button.
Press the ÿ button.
The service indicator now displays the
Addit. Work
menu.
Select the
Exh.-gas analysis
General inspection
menu with the
+ or - button.
Press the ÿ button.
The service indicator now displays the
Next due date
Select the
Month a
+ or - button.
Press button k or j on the mul-
or
tifunction steering wheel to set the
month and year.
Select
Confirm
button.
Press the ÿ button.
The new date is set.
menu.
nd
Year
with the
with the + or -