Twin Roller Blind - Mercedes-Benz 2005 E -Class Wagon Operator's Manual

Controls in detail
Loading
Installing the storage box
Fold rear seat backrests forward
( page 247).
Insert storage box from behind into
cargo compartment with the opening
pointing in the direction of travel.
Press locking hooks of storage box into
the space between the rear seat back-
rest and the cargo compartment.
Fold rear seat backrest to the rear
( page 248).
i
The storage box is additionally held in
place from above by the twin roller
blind.
Loading the storage box
Fold rear seat backrests forward
( page 247).
Fill storage box with cargo through the
opening on the front side.
256
i
The storage box in the cargo compart-
ment is covered by the rear bench seat
and can hold a maximum of 44 lbs
(20 kg) cargo.
Fold rear seat backrest to the rear
( page 248).
Removing the storage box
Fold rear seat backrests forward
( page 247).
Slide locking hooks of storage box for-
ward out of the retainers.
Pull storage box to the rear and remove
it from cargo compartment.
Fold rear seat backrest to the rear
( page 248).

Twin roller blind

The twin roller blind contains a cargo net
and a luggage cargo compartment.
It is located on the seat backrest of the
rear bench seat.
Cargo net
Warning!
The cargo net cannot hold back heavy loads.
The transported load should therefore al-
ways be tied down.
Objects which are insufficiently secured
could otherwise injure you if they are thrown
around in the event of an accident, during
hard braking or steering maneuvers.
G