Practical hints
Replacing wiper blades
!
To avoid damage to the hood, the wiper
arms should only be folded forward
when in the vertical position.
416
Removing wiper blades
Turn SmartKey in starter switch to
position 1.
Turn combination switch to wiper
setting II ( page 52).
With wiper arm in the vertical position,
turn SmartKey in starter switch to
position 0.
Warning!
For safety reasons, switch off wipers and re-
move SmartKey from starter switch (vehi-
cles with KEYLESS-GO*: Make sure the
vehicle's on-board electronics have status
0) before replacing a wiper blade. Other-
wise, the wiper motor could suddenly turn
on and cause injury.
Fold the wiper arm forward until it
snaps into place.
G
Turn the wiper blade at a right angle to
wiper arm.
Slide the wiper blade sideways out of
the retainer.