Deactivation; Programming - BMW F 800 GS Rider's Manual

Deactivation

with alarm system (DWA)
Deactivating alarm
function
NOTICE
Note that you can deactivate the
alarm function with the ignition
key only when the kill switch is in
the RUN position.
NOTICE
If the alarm function is deactiv-
ated by the remote control and
the ignition is not subsequently
switched on, the alarm func-
tion automatically goes active
again after 30 seconds if "Ac-
tivation after ignition OFF" is
programmed.
OE
Operate the 1 button of the re-
mote control once or switch on
the ignition using an authorised
ignition key.
Turn indicators flash once.
Alarm tone sounds once (if
programmed).
Alarm function is deactivated.
Conserving the battery
(DWA activated)
Approximately one hour after the
alarm is armed, the receiver for
the remote control in the DWA
anti-theft alarm shuts down in
order not to draw power un-
necessarily from the battery. If
you want to deactivate the alarm
function after the receiver has
shut down in this way, you have
to switch the ignition on.

Programming

with alarm system (DWA)
Programming options
You can customise the follow-
ing parameters of your anti-theft
alarm:
Confirmation alarm tone after
activation/deactivation of the
DWA in addition to flashing
turn indicators.
Rising and falling or intermittent
alarm tone.
Automatic activation of the
alarm function after the igni-
tion is switched off.
5
61
OE
z