Aaeon HSB-800P User Manual page 39

H a l f - s i z e S B C
Step 5 – Install SATA Driver
Place the Driver CD-ROM into your CD-ROM drive and pull up
the CD-ROM file on your screen.
1. Click on Start button
2. Click on Settings button
3. Click on Control Panel button
4. Click on System button
5. Select Hardware and click on Device Manager...
6. Double click on SCSI and RAID Controller
7. Click on Update Driver...
8. Click on Next
9. Select Search for a suitable driver..., then click on Next
10. Select Specify a location, then click on Next
11. Click on Browse
12. Select "silicon Image Sil3112 SATALink Controller" file
from CD-ROM (Driver/Step 5- SATA Driver) then click on
Open
13. Click on OK
14. Click on Next
15. Click on Yes
16. Click on Finish
Chapter 4 Driver Installation
4-6
H S B - 8 0 0 P