Cleaning And Maintenance - Black & Decker FP800 User Manual

Ingredients can be added through the kidney-shaped slot in
the bowl lid (10) after removing the pusher (9). The pusher
must be used to guide the ingredients into the path of the
blade.
Using the blender jar
Use the blender jar (5) for the fine blending of raw
ingredients and blending of cooked ingredients to a very
smooth consistency.
Note: There is a convenient measuring cup fitted in the
blender lid (7).
See the section "Quantities and processing times" in this
manual.
Warning! Make sure the food processor is unplugged from
the power source and switched off before placing or
removing accessories.
Remove any accessories from the processor bowl (8)
and refit the lid (10) and the pusher (9).
Remove the cap (1) by rotating it in an anti-clockwise
direction.
Add the ingredients to the blender jar (5) and fit the lid
(7), rotating it in an anti-clockwise direction until it locks
in place. Do not exceed the maximum mark.
Place the blender jar (5) in the recess (2) and rotate it in
a clockwise direction until it locks in place.
Note: The blender jar cannot be fitted to the appliance
unless the lid (7) is correctly fitted to the jar.
Note: The blender lid (7) cannot be removed when the
blender jar (5) is fitted to the appliance.
Quantities and processing times
Attachment Ingredient
Chopping Meat,
Blade vegetables
Soups, drinks
Potatoes and
fruit
Pastry,
scones
Cakes
Coarse and Vegetables,
Fine cheese
Shredding Potatoes, fruit
Blade
Slicing Vegetables,
Blade cheese
Fruit,
chocolate
Batons
Plastic Eggs
Whisking
Disc
Blender Soup, purees,
drinks,
milkshakes
and batters

Cleaning and maintenance

Warning! Switch the appliance off and unplug it before
cleaning or maintenance.
Warning! Do not immerse the appliance, the cord set or the
plug in water or any other liquid.
Always clean the appliance immediately after use. Do not let
food dry on to the jug, cover or blades as this will make
cleaning difficult.
Do not wash any parts of the appliance, other than the
stainless steel blades, in a dishwasher.
Motor housing
Wipe the motor housing with a damp cloth and dry
thoroughly. Do not use any abrasive or solvent-based
cleaner.
Blender jar
To clean the blender jar (5), fill it with warm water and
washing up liquid, run for 30 seconds on maximum
speed and repeat as necessary.
Accessories and processor attachments
Wash all the accessories and processor attachments by
hand, rinse with clean water and dry thoroughly.
ENGLISH
Quantity Speed Time
800 g 3-Max 20-30 s
800 g 1 or 2 20 s
700 g 2 or 3 15-20 s
450 g 2 1 min
1500 g 2 1 min
800 g 1 2 min max
950 g 1 2 min max
1000 g 1 2 min max
1000 g 1 2 min max
1000 g 1 2 min max
8 1 or 2 1-2 min
1.7 lt 1, 2, 3, 2 min max
pulse
5