Operating The Functions In The Main Menu; Calling Up/Quitting The Main Menu And Submenus; Areas (Status Interrogation) - Bosch UEZ Operation Manual

Operating the Functions in the Main Menu

Calling up / quitting the main menu and submenus
Enter user code if required (see section on Operating Authorisations)
F
Call up
main menu
Call up
submenus
Leave sub–
stop
menus and
main menu
Code
Abandon code
operation
614–30.0212.0270–01 A2
MAIN MENUE
AUTHORIZATION 2
ALARMCOUNTER 1 112
ALARMCOUNTER 2 219
AREAS INT.-PROG
TIMER BACKG.MEM CHAN.CODE
SWITCHOFF MAINTEN.
PROGRAM A.VERIF.
Press "Stop" until the submenu and main menu have
been quit.
In code operation, press "code";
code operation is terminated.
12 : 23
22.11.96
VISU.TEST
BLOCK
The softkey can be used
to move from the main menu to the
next submenu.
The authorisation (operator code)
and the alarm counter are displayed.
The individual submenus and their
functions can then be called up using
the appropriate softkey (e.g. "Zones"
submenu).
After the last submenus have been
called up and the softkey
has been pressed, the first subme-
nus of the main menu are displayed
again.
24