Mounting Points - Elation POWER SPOT 700CMY II User Manual

Power Spot 700CMY II™

Mounting points

Overhead mounting requires extensive experience, including amongst others calculating
working load limits, a fine knowledge of the installation material being used, and periodic
safety inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the power
cord to the appropriate wall outlet.
Clamps
The POWER SPOT 700CMY II™ has been designed to hold multiple clamps to the bottom
of the unit in several different orientations. Always use an appropriately rated clamp to
mount this unit to truss. Refer to the printed instructions on the bottom of the fixture for
proper clamp installation.
a) Cam lock System: This system allows a quick and efficient means to
secure a clamp to the unit. To attach a clamp to the unit, attach a clamp
that is rated to handle the weight of the unit to your cam lock. After a clamp
has been attached to the cam lock, attach the cam locks to the designated
position on the bottom of your unit. Lock the cam locks into position by
turning the wing nuts 90°.
©Elation Professional, Los Angeles Ca.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE
0711-217 for proper installation in Europe
To ensure proper installation, only qualified staff should
attempt installation.
CAUTION!
Be sure a qualified
connections.
electrician performs
17
all electrical
www.ElationLighting.com