Preparation And Installation; Mounting; Clamps - Elation Power Spot 250 User Manual

Power Spot 250™
2.

Preparation and Installation

2.1 Mounting

The POWER SPOT 250™ is fully operational in two different mounting positions,
hanging upside from a ceiling or set on a flat level surface. To avoid internal
damage to the unit, never mount the unit on its side as illustrated below. Be sure
this fixture is kept at least 0.5m away from any flammable materials (decoration
etc.). Install a safety cable that can hold at least 10 times the weight of the fixture.
Never use the carrying handles for secondary attachment.

2.1.1 Clamps

The POWER SPOT 250™ has been designed to hold multiple clamps to the
bottom of the unit in several different orientations. Always use an appropriately
rated clamp to mount this unit to truss. Refer to the printed instructions on the
bottom of the fixture for proper clamp installation.
©Elation Professionals® Los Angeles, Ca.
Refer to regulations BGV C1 (formerly VBG 70) and DIN VDE
0711-217 for proper installation in Europe
To ensure proper installation, only qualified staff should attempt
installation.
- wwww.ElationLighting.com
11
- Page