Leica V-LUX 4 Instructions Manual page 91

Changing position and size of the AF frame (Only when [Ø] is selected)
∫
If you perform any of the following operations, the screen will switch to the settings menu.
•
When [Ø] is selected, press [FOCUS].
•
From the menu screen, select [Ø], and press
1
Press 3/4/2/1 to move the AF frame.
•
You can move the frame to any position on the screen except the
edges.
•
After moving the AF frame, press [DISP.] to return it to the center.
2
Rotate the setting wheel to change the size of the AF frame.
Setting wheel rotated to the right: Enlarges the frame
Setting wheel rotated to the left: Reduces the frame
•
It can be changed to 4 different sizes.
3
Press [MENU/SET] to set.
Notes
•
The AF frame cannot be moved during motion picture recording.
•
The spot metering target can also be moved to match the AF frame when using [Ù].
•
The position of the AF frame will return to the initial state when the camera is set to Snapshot Mode,
when the Sleep Mode is activated, or when the camera is turned off.
•
The AF frame may not be displayed as intended at certain zoom magnifications or under low light.
Recording
1 .
- 91 -