Message Displays - Leica V-LUX 4 Instructions Manual

Message Displays

Confirmation or error messages will be displayed on the screen in some cases.
The major messages are described below as examples.
[This picture is protected]
> Delete the picture after canceling the protect setting.
[This picture cannot be deleted]/[Some pictures cannot be deleted]
•
Pictures not based on the DCF standard cannot be deleted.
> If you want to delete some pictures, format the card after saving necessary data on a computer
etc. (P65)
[Cannot be set on this picture]
•
[Title Edit], [Text Stamp] or [Print Set] cannot be set for pictures not based on the DCF standard.
[Built-in memory full]/[Memory card full]/[Not enough space on built-in memory]/[Not
enough memory on the card]
•
There is no space left in the internal memory or the card.
•
When you copy pictures from the internal memory to the card (batch copy), the pictures are copied
until the capacity of the card is depleted.
[Some pictures cannot be copied]/[Copy could not be completed]
•
The following pictures cannot be copied.
–
When a picture with the same name as the picture to be copied exists in the copy destination.
(Only when copying from a card to the internal memory.)
–
Files not based on the DCF standard.
•
Moreover, pictures recorded or edited by other equipment may not be copied.
[Built-In Memory Error
Format built-in memory?]
•
This message will be displayed when you formatted the internal memory on a computer.
> Format the internal memory on the camera again.
deleted.
Others
(P164)
(P65) The data in the internal memory will be
- 190 -