Multiple pictures are taken at one time.
> Cancel the settings of White Balance Bracketing (P87).
> Set Auto Bracketing
•
Is the Self-Timer
(P80)
The subject is not focused properly.
•
The focus range varies depending on the recording mode.
> Set to the proper mode for the distance to the subject.
•
The subject is beyond the focus range of the camera.
•
There is camera shake or the subject is moving slightly.
The recorded picture is blurred.
The Optical Image Stabilizer is not effective.
> The shutter speed becomes slower when pictures are taken in dark places so hold the camera
steady with both hands to take the pictures.
> When taking pictures at a slow shutter speed, use the Self-timer.
Taking pictures using Auto Bracketing is not possible.
•
Is there any memory remaining in the internal memory or the card?
The recorded picture looks rough.
Noise appears on the picture.
•
Is the ISO sensitivity high or the shutter speed slow?
(ISO sensitivity is set to [AUTO] when the camera is shipped. Therefore, when taking pictures
indoors etc. noise will appear.)
> Decrease the ISO sensitivity.
> Increase the setting for [Noise Reduction] in [Photo Style] or lower the setting for each of the
items other than [Noise Reduction].
> Take pictures in bright places.
•
Has [High Sens.] in the Scene Mode been set? If so, the resolution of the recorded picture
decreases slightly because of high sensitivity processing, but this is not a malfunction.
Striping or flicker may appear under lighting such as fluorescent lighting and LED
lighting.
•
This is characteristic of MOS sensors like the one in this camera.
This is not a malfunction.
(P139)
or the Continuous Mode
set to [10s / 3pictures]?
(P82)
(P128)
Others
(P77)
to [OFF].
(P31)
(P26)
(P26)
- 194 -
(P80)