Inserting And Removing Card And Battery - Leica V-LUX 4 Instructions Manual

Inserting and Removing Card and Battery

•
Turn the camera off and confirm that the lens barrel is retracted.
•
Close the flash.
1
Set the camera ON/OFF switch to OFF, push
the release slider in the direction of the
arrow, and open the card/battery door.
•
Use only the Leica battery BP-DC12 (P7).
•
We cannot guarantee the quality of any other
batteries.
2
Insert battery and card.
Be sure to insert in the correct orientation.
Battery: Push it in until it is locked by the
lever A. To remove, pull this lever in the
direction of the arrow.
Card: Push it down until it clicks into place.
To remove, push it further down until it
clicks, then pull it out upright.
B: Do not touch the connection terminals of the card.
3
1:Close the card/battery door.
2:Push the release slider in the direction of
the arrow.
Notes
•
Remove the battery when you are not going to use the camera for a long time. (The battery will be
exhausted if left for a long period of time after being charged.)
•
Remove the card or battery only after turning off the power, i.e. with the power lamp completely
turned off and the lens barrel retracted completely. (Otherwise, the camera may not function
properly, or the card or the recorded contents may be damaged.)
Preparation
- 19 -
B