Leica V-LUX 4 Instructions Manual page 196

Monitor/Viewfinder
The monitor/viewfinder becomes darker or brighter for a moment.
•
This phenomenon appears when you press the shutter release button halfway to set the aperture
value and does not affect the recorded pictures.
•
This phenomenon also appears when the brightness changes when the camera is zoomed or when
the camera is moved. This is because of operation of the automatic aperture of the camera, and it is
not a malfunction.
The monitor flickers indoors.
•
The monitor may flicker for a few seconds after the camera is turned on. This is an operation to
correct flicker caused by lighting such as fluorescent lights, LED lights etc. and is not a malfunction.
The monitor/viewfinder is too bright or dark.
•
Check [LCD Mode] setting.
•
Perform [LCD Display]/[Viewfinder].
The picture is not displayed on the monitor.
•
Does the picture appear in the viewfinder?
> Press [EVF/LCD] button to switch to monitor display.
Black, red, blue and green dots appear on the monitor.
•
This is not a malfunction.
These pixels do not affect the recorded pictures.
Noise appears on the monitor.
•
In dark places, noise may appear to maintain the brightness of the monitor. This does not affect the
pictures you are recording.
Others
(P55)
(P55)
- 196 -