Setting the type of defocus
∫
With [Miniature Effect] you can make the subject stand out by determining the defocused and
in-focus areas. You can set the (defocus) orientation and the position and size of the in-focus
area.
1
Press [Fn3] to display the setting screen.
•
A frame around the area not to be blurred will be displayed.
2
Adjust the position and size of the frame and then press [MENU/SET] to set.
A When the frame is horizontal
Moves (up and down)
3/4
Switches to B
2/1
Enlarge and reduce
•
•
If you press [DISP.], the adjusted frame will return to the original values.
C Non-blurrable area
Notes
•
The monitor image refresh rate is reduced, which may cause the displayed image to change less
smoothly.
•
No sound is recorded in motion pictures.
•
When taking pictures with high resolution, the screen may turn black after taking the picture because
of signal processing. This is not a malfunction.
•
With camera model 18 190:
1
Approximately
/
of the time period is recorded. (If you record for 8 minutes, the resulting motion
8
picture recording will be approximately 1 minute long.)
The displayed available recording time is approximately 8 times. When switching between recording
modes, please check the available recording time.
•
With camera models 18 191 / 18 192:
1
Approximately
/
of the time period is recorded. (If you record for 10 minutes, the resulting motion
10
picture recording will be approximately 1 minute long.)
The displayed available recording time is approximately 10 times. When switching between recording
modes, please check the available recording time.
You can switch between three levels.
Recording
B When the frame is vertical
Switches to A
Moves (left and right)
A
C
- 116 -
B
C