Displaying Multiple Images (Multi Playback)
Rotate the zoom lever towards [W].
1 image>12 images>30 images>Calendar screen
display
A Number of the selected picture and the total number of
recorded pictures
•
Rotate the zoom lever towards [T] to return to the former display.
•
Pictures displayed using [
To return to normal playback
∫
Press 3/4/2/1 to select a picture and then press [MENU/SET].
Using the Playback Zoom
Rotate the zoom lever towards [T].
1k>2k>4k>8k>16k
•
When you rotate the zoom lever towards [W] after enlarging the
picture, the magnification becomes lower.
•
When you change the magnification, the zoom position indication
A appears for about 1 second, and the position of the enlarged
section can be moved by pressing 3/4/2/1.
•
The more a picture is enlarged, the more its quality deteriorates.
Switching the displayed image while maintaining a magnification setting
∫
You can switch the displayed image while maintaining the same magnification and position.
Rotate the setting wheel to select an other picture while a magnification is set.
•
The position of the magnified section returns to the center in the following cases.
–
Images with different aspect ratios
–
Images with different resolutions
–
Images with a different rotation direction (when [Rotate Disp.] is set to [ON])
Enlarging the focused part of the subject (display focus point)
∫
The camera memorizes the focused part of the subject during the recording, and can enlarge
the image with that part as the center.
Press [FOCUS] during image playback.
•
The focused part of the subject may not be at the center of the enlargement when it is at the edge of
the image.
•
The setting returns to the original enlargement if [FOCUS] is pressed again.
•
The following pictures cannot be enlarged because there is no part of the subject in focus:
–
Pictures that were taken without focusing
–
Pictures that were taken with manually focused
–
Pictures that were taken with a different camera
Basic
] cannot be played back.
- 43 -
A
1/26
2X
A
W
T
W
T