Table of Contents
Advertisement
SMH5
10. USING THE SMH5
10.1 Volume Adjustment
You can easily adjust the volume by rotating the Jog Dial. You will
hear a beep when the volume reaches maximum or minimum level.
The volume is set and maintained independently at different levels for
each audio source even when you turn off and on the headset. For
example, once you set the volume for mobile phone handsfree, it will
not change even if you adjust the volume when you hear Bluetooth
MP3 music. So you can always maintain the preferred optimum
volume level for each audio source.
10.2 Mobile Phone Call Making and Answering
1. When you have an incoming call, simply tap the Jog Dial or the
Phone Button to answer the call.
2. You can also answer the incoming call by loudly speaking any word
of your choice if
is enabled. (Refer to the next section for details.)
3. To end a call, tap the Jog Dial or the Phone Button, or wait for the
called person to end the call.
4. To reject a call, press the Jog Dial for 2 seconds until you hear a
beep while the phone is ringing.
16
5. To transfer a call between the mobile phone and the headset during
the phone conversation, press the Phone Button for 2 seconds until
you hear a beep.
6. There are several ways to make a phone call:
- Enter numbers on your mobile phone keypad and make a call.
Then the call is automatically transferred to the headset.
- For some older mobile phones which do not automatically transfer
calls to the headset, press the Phone Button after entering phone
numbers on the mobile phone keypad.
- Tap the Phone Button in stand-by mode to activate the voice
dialing of your mobile phone. For this, the voice dialing feature
must be available on the mobile phone. Refer to your mobile
phone manual for further instruction.
- To redial the last number, double tap the Phone Button in stand-by
mode. You will hear a voice prompt saying "Last number redial".
10.3 Enabling/Disabling Voice Activated Phone
Answering, VOX Phone (Factory Default: Enabled)
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough. For example, when you hear a series
of beeps for an incoming call, you can answer the phone by saying
"Hello" or any other word loudly. This is enabled from the factory but
you can disable this. If this mode is disabled, the only way to answer
an incoming call is to tap the Phone Button.
Advertisement
Table of Contents
