Table of Contents
Advertisement
ICE-‐LOCK
4 START UP
⇒ Insert SIM card to be used for ICE-LOCK in your personal mobile phone.
IMPORTANT
⇒ Insert SIM card in ICE-LOCK device.
The unit must be switched OFF when you insert the SIM!
⇒ Connect the external antenna to antenna connector.
⇒ Connect input and output to ICE-LOCK.
⇒ Connect power cable to ICE-LOCK device
⇒ Connect device to source power supply voltage.
⇒ Wait until LED1 (green) starts flashing. This is set in around 30 seconds.
⇒ ICE-LOCK unit is now ready to operate.
Before sending any SMS commands to ICE-LOCK device,
IMPORTANT
device must be powered ON and in normal operation!
ERASE THE PIN CODE ON THE SIM CARD!
Page
8
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
