Table 3: Remote Alarm Reporting Parameters - Transmitter Solutions ICE-LOCK Installation Manual

ICE-­‐LOCK
9.1.2 REMOTE REPORTING ALARM EVENTS
Parameters used to define the way to report the alarm event.
NOTE ICE-LOCK device send SMS messages for reporting alarm events.
9.1.2.1 TN parameters
Telephone numbers for remote alarm reporting are listed as TN parameters.
Remote alarm reporting on ICE-LOCK is done via SMS messages.
9.1.2.2 LN parameters
This parameter is used to link alarm event from inputs or any other source to the
telephone numbers on TN list.
9.1.2.3 Table of parameters
Name
TN1
TN2
TN3
TN4
TN5
LN1
LN3
LN4
LN5
LN6
Example:
♦ Direct programming on the SIM card
Name
TN1
LN1
LN5
1 st telephone number
nd
2 telephone number
3 rd telephone number
th
4 telephone number
5 th telephone number
Input & telephone No. linking for 1
TN5)
Periodic test SMS. No. linking (TN1 – TN5)
SIM card refill. No. linking (TN1 – TN5)
NAC list. No. linking (TN1 – TN5) (see note)
Log status. No. linking (TN1 – TN5)

Table 3: Remote alarm reporting parameters

ICE-LOCK PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
042376678 1st telephone number
13 Input 1 reports alarm to TN1 & TN3
1 NAC event sent to TN1
Comment
st
Description
Page 1 5
INSTALLATION M
alarm input (TN1 –
ANUAL