ICE-‐LOCK
♦ Remote programming by SMS
;TN1=042376678;LN1=13;LN5=1;
When telephone number (calling or messaging ICE-LOCK) is not
authorized, not acknowledge event occurs (NAC). The telephone
NOTE
number responsible for this event can be send to TN user for
notification.
9.2 OUTPUT MANAGEMENT
ICE-LOCK supports the possibility to report alarms from inputs and any other
events locally via 1 output. The behavior is defined using next parameters
9.2.1 OS parameter
ICE-LOCK device has 1 dedicated relay supported outputs. Outputs can be
configured to different behavior:
⇒ OSx = 0
⇒ OSx = 1
⇒ OSx = yyy
Typical connection for the output:
9.2.2 OD parameter
OD parameter is used to link the alarm event directly to output. Direct linking can
be done on input alarm events and some other internal events.
Table 4: Remote alarm reporting example
– Disabled
– Bi-stable toggle mode
– Mono-stable pulse mode (duration in seconds)
Figure 3: Output Connection diagram
Page
1 6
INSTALLATION
M
ANUAL