Table of Contents
Advertisement
ICE-‐LOCK
10 PRINT-OUT OF THE PARAMETERS
The user can check the settings of ALL parameters on the ICE-LOCK.
10.1
By sending this command to ICE-LOCK you receive SMS messages with all
parameters that are currently programmed in the unit:
;PALL;
10.2
By sending this command to ICE-LOCK you receive SMS messages with current SW
version running on ICE-LOCK device:
;PSW;
10.3
By sending this command to ICE-LOCK you receive SMS messages with signal
quality when ICE-LOCK device is connected to network:
;PSQ;
10.4
By sending this command to ICE-LOCK you receive SMS message with all currently
programmed telephone numbers:
;PTN;
10.5
By sending this command to ICE-LOCK you receive SMS message with all currently
programmed links:
;PLN;
RECEIVE ALL PARAMETERS (PALL)
CHECK SW REVISION (PSW)
CHECK SIGNAL QUALITY (PSQ)
RECEIVE TELEPHONE NUMBERS (PTN)
RECEIVE LINKS (PLN)
Page
3 0
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
