Table of Contents
Advertisement
ICE-‐LOCK
8 PROGRAMMING ICE-LOCK
ICE-LOCK device supports different types of programming:
⇒ You can program ICE-LOCK remotely by SMS command. You can program all
parameters including the PIN access codes (PINx parameters).
⇒ You can program ICE-LOCK directly with the use of USB connection on the
device. You can program all parameters except PIN access codes.
Programming of PIN access codes is not supported yet on EasySet SW, you
can program them by sending simple SMS message to the unit.
If there is no CD with the program and drivers in your package, please
contact your reseller to receive the application running on PC for
management of the ICE-LOCK and the appropriate USB drivers.
Page
1 2
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
