Table of Contents
Advertisement
ICE-‐LOCK
♦ Direct programming on the SIM card
Name
LOGN
LOGI
ALC
♦ Remote programming by SMS
;LOGN=5;LOGI=0;ALC=1;
9.9 SPECIAL SMS COMMANDS
These commands can only be issued only over SMS message, and are used to
control some special functions of ICE-LOCK device.
9.9.1 ORC command
Command is used to control outputs directly via SMS message
9.9.2 SDCLR command
To clear all data on SIM card SDCLR command is used.
9.9.3 LCRL command
Command clears log on ICE-LOCK device.
9.9.4 CLPCLR command
Command is used to delete all CLP numbers.
ICE-LOCK PROGRAMMING TABLE
SIM CARD PHONE BOOK
Number
5
5 log events will be printed out on PLOG command
0
Nonvolatile memory on ICE-LOCK
1
Log is auto cleared when full
Table 20: LOG parameters example
Description
Page
2 8
INSTALLATION
M
ANUAL
Advertisement
Table of Contents
