Manual Station Storage; Autostore Function; Listening To Stored Stations - Fiat Bravo Soundsystem Manual

MANUAL STATION STORAGE

Use buttons from 1 to 6 to store the sta-
tion being heard in the selected band.
Keep pressed one of these buttons (1 to
6), when station storing is completed the
display will show the corresponding but-
ton number and a confirmation beep will
be given.

AUTOSTORE FUNCTION

(automatic station storage)
To switch on the AutoSTore function (au-
tomatic station storage), keep button
BAND . With this function the radio au-
AS
tomatically stores the stations with the
strongest signal in decreasing order of in-
tensity in the FMAST frequency band (if
tuned on FM band) or AMAST (if tuned on
AM band).
IMPORTANT Activating the AutoSTore
function cancels the stations stored pre-
viously in the FMAST or AMAST band.
During automatic storage the display
shows "TUNER FMAST" or "TUNER
AMAST" if TUNER mode (Radio) with FM
or AM frequency band is selected. To in-
terrupt the automatic station storage,
press button BAND again: the radio will
AS
automatically tune to the station heard be-
fore activation of the AutoSTore function.
LISTENING TO STORED
STATIONS
Proceed as follows:
– select the required frequency band and
the storage block (FM1, FM2, FM3,
FMAST, MW, LW, AMAST);
– briefly press one of the six station stor-
age buttons.
The display will show the station name (if
present) and frequency, whereas at the
bottom of the display is shown "Pn"
where n is the number corresponding to
the current station.
In bands FM1, FM2 and FM3, if reception
is poor or weak and the AF alternative fre-
quency search function is active, the sta-
tion with the strongest signal that is broad-
casting the same programme will be
sought automatically.
17