Radio (Tuner); Introduction; Selecting The Frequency Band; Presetting Buttons - Fiat Punto Sound System Manual

RADIO (Tuner)

INTRODUCTION

When the set is turned on, the last func-
tion selected before turning off is played
(Radio, CD or CD Changer).
To select the Radio source while listening
to another audio source, press briefly and
repeatedly button SRC-SCN.
When Tuner is on, the display will show
the selected station name (RDS stations
only) (or frequency), the frequency band
(e.g.: FM1) and the preselection button
number (e.g.: P1).
16
SELECTING THE
FREQUENCY BAND
When in Radio mode, briefly and repeat-
edly press button BAND-AS to select the
required reception band.
Every time the button is pressed the fol-
lowing bands are selected in sequence
"FM1", "FM2", "FMT","MW" and "LW"
shown by the respective wording on the
display.
The last station selected in the respective
frequency band will be tuned.
The FM band is divided into sections: FM1,
FM2 and FMT. The FMT reception band is
reserved to the stations stored automati-
cally with the AutoSTore function.

PRESETTING BUTTONS

The buttons with symbols from 1 to 6
make it possible to set the following pre-
settings:
❒ 18 in the FM band (6 in FM1, 6 in FM2,
6 in FMT);
❒ 6 in the MW band;
❒ 6 in the LW band;
❒ 6 types of PTY programming (only in
the FM mode when PTY is selected).
To call a preset station, choose the re-
quired frequency band and then press
briefly the corresponding preset button
(from 1 to 6).
Pressing the respective preset button for
longer than 2 seconds will store the tuned
station. Storing is confirmed by a beep.
STORING THE LAST STATION
HEARD
The radio automatically keeps in storage
the last station heard for each reception
band, which is then tuned when the ra-
dio is turned on or the reception band is
changed.

AUTOMATIC TUNING

Briefly press button N or O to start au-
tomatically searching the tuning for the next
station that it is possible to receive in the
direction chosen.
If button N or O is pressed for longer,
quick searching takes place. When the but-
ton is released, the tuner stops on the
next receivable station.