Menu - Fiat Bravo Soundsystem Manual

PTY setting
Press button AF for over 2 seconds to
PTY
display the PTY code of the current sta-
tion. Select the required code by turning
the button/knob ON/OFF and then press
button È or Í to start automatic seek-
ing of stations with the PTY code select-
ed. Automatic seek will stop automatical-
ly to the next station broadcasting the PTY
programme selected. The type of pro-
gramme will be displayed (e.g. "POP") with
the word "PTY" flashing.
IMPORTANT If no station is broadcasting
the selected PTY, the last station will be
tuned and the PTY function is aborted.
PTY function deactivation
After entering the PTY mode, if no oper-
ation is performed within 10 seconds, the
radio returns to the mode active before
pressing the AF button and it will store
PTY
the last PTY code selected.
20

MENU

MENU button options
RDS
To activate the Menu, press briefly the
button MENU .
RDS
In this way you open the first level Menu.
To open the second level menu keep the
MENU button pressed for over 2 sec-
RDS
onds.
To scroll the Menu options press repeat-
edly the MENU button.
RDS
First level Menu options are the follow-
ing:
1 MANUAL TUNING SEEK on/off
2 CD Compression
3 Confirmation beep (BEEP)
4 Tuning sensitivity adjustment (SENS
DX/LO)
5 News programmes on/off (NEWS)
6 Automatic volume adjustment with car
speed (SVC)
7 Traffic announcements tuning (EON
TA)
8 Loudness on/off (LOUD- NESS)
9 CD naming (CD NAMING) (only in CD
Changer mode);
10 CD naming/track selection (TPM =
Track Program Memory)
Press buttons È or Í to activate/deacti-
vate the function selected.
Second level Menu options are the fol-
lowing:
1 Time display of the current RDS station
(if available)
2 "Audio distortion clipper" on/off (AU-
DIO CLIP DETECT)
3 Max volume setting at switching on
(MAX VOLUME)
4 Telephone volume adjustment (PHONE)
5 AUTO setting selection which enables
to set radio turning on/off depending on
car ignition/switching off.
Use the button/knob ON/OFF to turn
on/off the function selected.
NOTE Each time you pass to next setting,
the previous one will be stored.