Fiat Bravo Soundsystem Manual page 25

Second level menu options
1 - RDS (station time display)
This option makes it possible to display
the time of the current RDS station (if this
information is available).
2 - AUDIO CLIP DETECT
("audio distortion clipper" on/off)
This function reduces automatically the ra-
dio output level when excessive distortion
is detected that could damage the speak-
ers.
Use buttons È or Í to turn this function
on/off.
The display will show the current function
condition:
– "CLIP DETECT: ON" = function on
– "CLIP DETECT: OFF" = function off
24
3 - MAX VOLUME (max. volume
setting at switching on)
This function can be used to set the max-
imum volume (from 10 to 33) that can be
set using the control.
Use the button/knob ON/OFF to adjust
the volume.
The display will show the set volume (e.g.:
"MAX VOLUME: 25")
4 - PHONE
(phone volume adjustment)
This function makes it possible to set the
phone volume (from 1 to 3).
The display will show, as standard, the
message "PHONE LEVEL: OFF" (volume
set by the Manufacturer, corresponding to
max. level).
Use the button/knob ON/OFF to adjust
the volume to 3 different levels (PHONE
LEVEL 1 , PHONE LEVEL 2 and PHONE
LEVEL 3): the higher the number is, the
lower will be the phone volume.
5 - AUTO (function setting)
With this function it is possible to set ra-
dio turning on/off depending on car igni-
tion/switching off or independent.
With this function on (radio is set to
switch off when the car is switched off),
it is however possible to switch on the ra-
dio.
With this function off, when switching off
the car the radio stays on.
Use buttons È or Í to turn this function
on/off.
The display will show the current function
condition:
– "AUTO: ON" = function on
– "AUTO: OFF" = function off