Mute Function; Soft Mute Function; Tone Adjustment; Balance Adjustment - Fiat Bravo Soundsystem Manual

MUTE FUNCTION

(turning off the volume
completely)
To switch the Mute function on, press
briefly the button MUTE. Volume will
gradually lower (Soft Mute function) and
the display will show the current sound
source selected followed by the Mute (e.g.
"TUNER MUTE" when the Radio is se-
lected).
To switch the Mute function off, press
briefly the button MUTE again. Volume
will gradually become louder (Soft Mute
function) returning to the value set before
switching on the Mute function.
Turning the button/knob ON/OFF the
sound level changes; the Mute function will
however stay on. Press the button MUTE
again to turn it off.
When the Mute function is on, all the oth-
er functions can be used. If a traffic an-
nouncement arrives with the TA function
on, the traffic message will ignore the
Mute function.

SOFT MUTE FUNCTION

When the Mute function is turned on/off
the volume will gradually increase or de-
crease (Soft Mute function).

TONE ADJUSTMENT

(bass/treble)
Proceed as follows:
– briefly and repeatedly press button AU-
DIO until the display shows "BASS"
DSP
or "TREBLE".
– turn the knob ON/OFF clockwise to in-
crease bass or treble tones or turn it
counter-clockwise to decrease.
The display will show for a few seconds
the bass/treble levels (–10 to +10).
A few seconds after the last setting the dis-
play will resume the radio main screen.

BALANCE ADJUSTMENT

Proceed as follows:
– briefly and repeatedly press button AU-
DIO until the display shows "BAL-
DSP
ANCE"
– turn the button/knob ON/OFF clock-
wise to increase the sound from the right
speakers or turn it counter-clockwise to
increase the sound from the left speakers.
The display will show for a few seconds
the balance levels, from Í +10 to È +10
(È = right, Í = left). A few seconds af-
ter the last setting the display will resume
the radio main screen.
13