Fiat Connect 7.0 Manual
  1. Manuals
  2. Brands
  3. Fiat Manuals
  4. Car Receiver
  5. 70
  6. Manual
Fiat Connect 7.0 Manual

Fiat Connect 7.0 Manual

124 spider 2018
Hide thumbs
Table of Contents

Advertisement

Quick Links

1
2
4
S
P
I
D
E
R
F
I
A
T
7
.
0
C
O
N
N
E
C
T

Advertisement

Table of Contents
loading

Related Manuals for Fiat Connect 7.0

Summary of Contents for Fiat Connect 7.0

  • Page 2 CONTENTS INTRODUCTION ... . . 3 OPERATING THE RADIO ..15 BLUETOOTH ....30 Radio On .
  • Page 3 NAVIGATION ....59 Before Using The Navigation System ....59 Navigation Menu .

  • Page 4: Introduction

    INTRODUCTION TIPS, CONTROLS, Note: The volume may be increased AND GENERAL when receiving traffic alerts and news. INFORMATION The vehicle is equipped with an audio system designed according to the Care And Maintenance specific characteristics of the Tips passenger compartment, with a Caution! customized design that matches the style of the dashboard.

  • Page 5: Important Information

    Important Information Note: Cybersecurity To prevent damage to the antenna, In the event of a fault, the system must Your vehicle may be a connected remove it before passing beneath a only be checked and repaired by an vehicle and may be equipped with both low overhead clearance.

  • Page 6: General Information

    OPERATING TIPS support/system_updates (Canadian Residents) to learn about available FOR THE AUDIO Warning! Uconnect software updates. SYSTEM – Only connect and use trusted media devices (e.g. personal mobile It is not possible to know or to predict Warning! phones or USBs). all of the possible outcomes if your vehicle’s systems are breached.

  • Page 7: Radio Reception

    RADIO RECEPTION Atmospheric conditions can also affect Weak Signal Noise FM reception. High humidity will cause In suburban areas, broadcast signals poor reception. However, cloudy days AM Characteristics become weak because of distance may provide better reception than clear from the transmitter. Reception in such days.

  • Page 8: Operating Tips For Mp3

    OPERATING TIPS OPERATING TIPS Supply of this product only conveys FOR MP3 a license for private, non-commercial FOR WMA use and does not convey a license MP3 stands for MPEG Audio Layer 3, WMA is short for Windows Media Audio or imply any right to use this product in which is standardized voice and is the audio compression format...

  • Page 9: Operating Tips For Aac

    OPERATING TIPS OPERATING TIPS OPERATING TIPS FOR AAC FOR OGG FOR USB DEVICES — IF EQUIPPED AAC stands for Advanced Audio Coding, OGG is the audio compression format which is standardized voice compression for Xiph. Org Foundation. This unit plays audio files as follows: established by the ISO (*) working group Audio data can be created and stored (MPEG).

  • Page 10: Operating Tips For Ipod

    OPERATING TIPS When connecting the iPod to a Audio Set FOR IPOD USB port, all commands are made Note: The explanation of functions from the audio unit. iPod control is not described in this publication may differ This unit supports playback of music possible.

  • Page 11: Basic Operation Method

    Turn the volume dial to adjust the : displays the Favorites screen. Basic Operation Method volume. The volume increases by turning Long-press to store particular items in Touch & Tap the dial clockwise, and decreases by Favorites (radio, phonebook and Proceed as follows: turning it counterclockwise.
  • Page 12 Slide Swipe Return To Previous Screen Touch the setting item displaying a Proceed as follows: Touch the Back button. slider bar. Touch the screen with your finger Displaying The Home Screen Touch the slider with your finger and and move up or down. Touch the Home button.

  • Page 13: Home Screen

    Home Screen Icon Functions Applications Information such as average fuel economy, maintenance, and warnings can be verified depending on the grade and specification, the screen display may differ. Entertainment Operates audio such as the radio and CDs. The audio source most recently used is displayed. An audio source which cannot be used at that time is skipped and the previous audio source is displayed.

  • Page 14: Volume/Display/Sound Controls

    Volume/Display/Sound Auto: switches screen automatically Controls Indication Setting Value according to headlight illumination condition (*) Volume Adjustment + Side: Low Pitch Bass Enhancement Day: daytime screen setting Turn the multimedia control knob VOL (Low Pitch Sound) – Side: Low Pitch dial.
  • Page 15 Automatic Volume Adjustment Bose AudioPilot (Automatic Volume Adjustment) The automatic level control (ALC) is a feature that automatically adjusts audio When driving, background noise can volume and sound quality according interfere with enjoying music. to the vehicle speed. The volume AudioPilot (*) noise compensation increases in accordance with technology continuously adjusts the...

  • Page 16: Operating The Radio

    OPERATING THE RADIO Radio On Select the icon on the home screen to display the Entertainment screen. When selecting the desired radio, the following icons are indicated in the lower part of the center display. AM/FM Radio Icon Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the station list (AM only).

  • Page 17: Radio Favorites

    Icon Function Automatic radio station selection. When long-pressed, the radio frequency changes continually. It stops when you remove your hand from the icon or the multimedia control knob. Displays the FM settings screen (FM only). On/Off of Alternative frequency and Region lock can be set.

  • Page 18: Radio Broadcast Data System Rbds) — If Equipped

    Radio Broadcast Data To Scan For Genre Seek Note: System (RBDS) — Only one Genre can be selected. Proceed as follows: If Equipped 1. Select the icon while in the FM It may not be possible to receive Radio Text Information Display mode.

  • Page 19: Hd Radio

    HD RADIO Listening To HD Radio volume become noticeably diminished or cut off, select the HD Radio icon Technology What is HD Radio Technology to turnoff HD Radio. The Icon will not If HD Radio icon turns on by selecting a And How Does It Work? illuminate.

  • Page 20: Operating The Satellite Radio — If Equipped

    (some areas of the United talk, hilarious comedy. Store, direct downloading from the States and Canada). Contact a Fiat World-class news plus local traffic and equipped vehicle audio is not possible. Dealership. weather. Sign up for Sirius XM Satellite...

  • Page 21: Siriusxm Operation

    How To Activate Satellite Radio Displaying The Radio ID (ESN) Icon Function You must call Sirius XM to re-activate When channel 0 is selected, the radio Plays each channel in the your service. Activation is free and ID is displayed. Use the PREVIOUS current channel list for takes only a few minutes.

  • Page 22: Parental Lock

    HOW TO USE Select From Category List PIN Code Reset AUXILIARY Proceed as follows: If the registered code has been JACK/USB PORT — forgotten, reset the code to the default Select the icon to display the IF EQUIPPED [0000] code. channel list.
  • Page 23 Settings Note: Depending on the grade and specification, the screen display may differ. Select the icon on the home screen to dis- play the Settings screen. Switch the tab and select the setting item you want to change. You can customize settings in the setup display as follows: Item Function Refer To “Volume/Display/Sound...

  • Page 24: Settings

    Item Function Tool Tips Turns Button Explanations On/Off Language Changes The Language Temperature Changes The Setting Between Fahrenheit And Celsius Distance Changes The Setting Between Miles And Kilometers Supplementary Music Information (Such As Song Name, Artist Music Database Update Name) System Voice Recognition Assistance For Play Artist Memory And Settings Are Initialized To The Factory Settings.

  • Page 25: Operation

    AUDIO CONTROL USB Audio/Bluetooth/ Mute Switch Audio — If Equipped SWITCH OPERATION Push the mute switch once to mute Push the seek switch to skip audio, press it again to resume audio Adjust The Volume forward to the beginning of the next output.

  • Page 26: If Equipped

    AUX/USB/IPOD Note: The SD card slot is for the naviga- Depending on the portable audio MODE — IF device, noise may occur when the tion system. For vehicles with the navi- EQUIPPED gation system, the SD card (FCA genu- device is connected to the vehicle ine) with stored map data is inserted accessory socket (if noise occurs, do into the SD card slot and used.

  • Page 27: How To Connect The Usb Port Auxiliary Jack

    How To Connect The Connecting With A Connector USB Port/Auxiliary Jack Icon Function Lead Displays the Entertainment Proceed as follows: menu. Use to switch to a 1. If there is a cover on the AUX jack or Warning! different audio source. USB port, remove the cover.

  • Page 28: If Equipped

    How To Use USB Mode — If Equipped Type Playable Data USB mode MP3/WMA/AAC/OGG file Note: This unit does not support a USB 3.0 device. In addition, other devices may not be supported depending on the model or OS version. USB devices formatted to FAT32 are supported (USB devices formatted to other formats such as NTFS are not supported).
  • Page 29 Icon Function If selected within a few seconds from the beginning of a song which has started to play, the previous song is selected. If more than a few seconds have elapsed, the song currently being played is replayed from the beginning. Long-press to fast reverse. It stops when you remove your hand from the icon or the multimedia control knob.
  • Page 30 Category List Select the icon to display the following category list. Select a desired category and item. Category Function Playlist Displays Playlists on the device. Displays the artist name list. All the tracks or tracks for each album of Artist the selected artist can be played.

  • Page 31: Bluetooth

    BLUETOOTH Example Of Use (To Play All Bluetooth Audio Outline Tracks In USB Device) When a portable audio unit equipped Method 1 Bluetooth Hands Free with the Bluetooth communication Outline function is paired to the vehicle, you Proceed as follows: can listen to music stored on the paired When a Bluetooth device (mobile 1.

  • Page 32: Component Parts

    Component Parts Volume Control Knob — Bluetooth Preparations If Equipped Microphone (Hands-Free) Device Pairing The Volume Control Knob, near the The microphone is used for speaking To use Bluetooth audio and Hands- Multimedia Control Knob, is used for voice commands or when making a Free, the device equipped with volume adjustment and display Hands-free call.
  • Page 33 6. Using your device, perform a search Note: About pairing and automatic Connecting Other Devices for the Bluetooth device (Peripheral reconnecting: Proceed as follows: device). If pairing is redone on the same 1. Select the icon on the home 7. Select “124 Spider” from the device mobile phone device, first clear screen to display the Settings screen.

  • Page 34: Available Language

    Disconnecting A Device 3. Select Bluetooth. Voice Recognition 4. Select Custom Settings. Proceed as follows: Warning! 5. Select Unpair All/Paired Devices. 1. Select the icon on the home 6. Select Yes. screen to display the Settings screen. ALWAYS drive safely with your hands on 2.

  • Page 35: Voice Recognition

    Troubleshooting For Voice The voice recognition cannot be Close the windows and/or the performed while voice guidance or the convertible top to reduce loud noises from Recognition outside the vehicle, or turn down the beep sound is operating. Wait until If you do not understand an operation airflow of the air-conditioning system while the voice guidance or the beep sound...
  • Page 36 Voice Command Function Corresponding Audio Source (Go To/Play) AM (Radio) Switches the audio source to AM radio (Go To/Play) FM (Radio) Switches the audio source to FM radio (Go To/Play) Satellite (Radio) Switches the audio source to satellite radio (Go To/Play) Bluetooth (Audio) Switches the audio source to BT audio (Go To/Play) Aha (Radio) Switches the audio source to Aha radio...

  • Page 37: Making A Call

    Making A Call Import Contact (Download Note: Phonebook) Phonebook Usage If “Import All Contacts” is performed after saving the phonebook Phonebook data from your device Telephone calls can be made by saying to the Bluetooth unit, the phonebook (Mobile phone) can be sent and the contact name in the downloaded will be overwritten.
  • Page 38 4. Select Add New Contact or Add New Deleting from your favorites Changing contact name of your Contact Details. favorites Proceed as follows: 5. Select from the displayed list. Proceed as follows: 1. Select the phone icon on the home screen to display the Communication Note: When “Add New Contact”...

  • Page 39: Receiving An Incoming Call

    Proceed as follows: Call Back Function 1. Select the phone icon on the home Makes a call to the last person who screen to display the Communication called your mobile phone/vehicle (latest screen. person on incoming call record). 2. When Dial Phone is pressed, the dial Proceed as follows: pad is displayed.
  • Page 40 The following icons are displayed on the screen during a call. Icons which can be used differ depending on use condition. Icon Function Displays the Communication menu. Ends the call. Transferring A Call From Hands-Free To A Mobile Phone Communication between the Bluetooth unit and a device (mobile phone) is cancelled, and an incoming call will be received by the device (mobile phone) like a standard call Transferring A Call From A Device (Mobile Phone) To Hands-Free Communication between devices (mobile phone) can be switched to Bluetooth Hands-Free...

  • Page 41: Call Interrupt

    Note: The function may not be operable Manually Downloading depending on the type of the If the ignition is switched off during When the “Auto Download SMS” (SMS) telephone network and the mobile a hands-free call, the line is transferred setting is off, the message is device.
  • Page 42 Receiving Messages Icon Function Icon Function Method 1 Displays the Makes a call to a When a device receives a message, a Communication person who sent a message received notification is menu. message. For E-mail, this function displayed. may not work Displays the inbox.
  • Page 43 Editing preset messages Proceed as follows: 1. Select the phone icon on the home screen to display the Communication screen. 2. Select Settings. 3. Select Preset Messages. 4. Select the preset message which you would like to edit. The keyboard screen is displayed.

  • Page 44: Communication Settings

    Communication Settings Select the phone icon on the home screen to display the Communication screen. Select Settings to change the setting. Item Setting Function Go to Bluetooth setting menu. Refer to Bluetooth — “Bluetooth Preparation” paragraph. Incoming Call Notifications On/Off Notifies when an incoming call is received.

  • Page 45: Bluetooth Audio

    Bluetooth Audio Response Profile A2DP (Advanced Audio Distribution Profile) Ver. 1.0/1.2 AVRCP (Audio/Video Remote Control Profile) Ver. 1.0/1.3/1.4 A2DP is a profile which transmits only audio to the Bluetooth unit. If your Bluetooth audio device corresponds only to A2DP, but not AVRCP, you cannot operate it using the control panel of the vehicle's audio system.
  • Page 46 Note: The battery consumption of Bluetooth audio devices increases while Bluetooth is connected. If a general mobile phone device is USB connected during music playback over the Bluetooth connection, the Bluetooth connection is disconnected. For this reason, you cannot have music playback over a Bluetooth connection and music playback using a USB connection at the same time.

  • Page 47: System

    How To Use The Note: Bluetooth Audio System If Bluetooth audio is used after Switching To Bluetooth Audio using Pandora, Aha or Stitcher radio, Mode the application on the mobile device has to be closed first. To listen to music or voice audio recorded to a Bluetooth audio device, If the Bluetooth audio device does switch to the Bluetooth audio mode...
  • Page 48 Icon Function Displays the Entertainment menu. Use to switch to a different audio source. AVRCP Ver. 1.4 only Displays the top level folder/file list. Select the folder which you want to select. The files in the selected folder are displayed. Select the file you want to play. AVRCP Ver.

  • Page 49: Display

    Bluetooth Audio Device Information Display If a Bluetooth audio device is connected, the following information is displayed in the center display. AVRCP Ver. Lower Than 1.3 AVRCP Ver. 1.3 AVRCP Ver. 1.3 Or Higher Device name Remaining Battery Charge Of Device Song Name —...

  • Page 50: How To Use Pandora

    How To Use Pandora Playback Note: Launch the Pandora app on the device What is Pandora The skip function may not be and select the icon on the home available depending on the device. Pandora is free personalized Internet screen to display the Entertainment The number of skips is limited radio.
  • Page 51 Bookmarking Note: Aha, the Aha logo, and the Aha trade dress are trademarks or registered You can bookmark song or artist to trademarks of Harman International check out later on the Web. Industries, Inc., used with permission. 1. Select the flag icon. The service content provided by 2.
  • Page 52 Icon Function Displays the Entertainment menu. Use to switch to a different audio source. Displays the main menu. Use to switch to other stations. Displays the content list. Use to switch to other desired content on the station. Shout Records voice. Records voice and posts it as playable audio to Facebook and other social stations. Like (*) Evaluates the current content as “Like”.
  • Page 53 Icon Function Goes to the next content. Fast-forwards for 30 seconds. Displays sound settings to adjust audio quality level (refer to “Volume/Display/Sound controls” paragraph). (*) Some stations may use alternate variations of Like and Dislike, based on station type or provider. Main Menu Example Of Use (Location Function...

  • Page 54: If Equipped

    2. When the icon is selected, the 3. Select Save and store/post the Note: To operate Stitcher Radio from currently displayed destination recording. your Bluetooth device, perform the is displayed on the navigation system following in advance: Note: (vehicles with navigation system). Install the Stitcher Radio application Recordable time varies depending 3.
  • Page 55 Note: Icon Function Multiple favorites stations can be Adds the current station to your selected and registered. favorites or deletes the current Favorites stations registered by station from your favorites. oneself as well those set by default are displayed. Reverses for 30 seconds. Delete from your favorites Plays the station.

  • Page 56: Troubleshooting

    TROUBLESHOOTING Bluetooth Hands-Free Customer Service If you have any problems with Bluetooth, contact an authorized dealer. Bluetooth Device Pairing (Connection Problems) Note: For more information and device compatibility, please refer to www.FiatConnect.com Symptom Cause Solution Method First make sure the device is compatible with the Bluetooth unit, and then check whether the Bluetooth function and the Find Unable To Perform Pairing.

  • Page 57: Problems

    Symptom Cause Solution Method The device is in a location in which radio wave interference can occur easily, such as Move the device to a location in which radio Disconnects Intermittently. in a bag or in a rear pocket of a pair of wave interference is less likely to occur.
  • Page 58 Symptom Cause Solution Method A poor connection or malfunction with Poor Voice Recognition There is a malfunction in the microphone. the microphone may have occurred. Contact an authorized dealer. If there is any malfunction after Phone-Related Voice Recognition Is There is a problem with the connection between checking the pairing situation, check Disabled.

  • Page 59: Regarding Problems With Calls

    Regarding Problems With Calls Symptoms Cause Solution Method For about three seconds after starting a call, When starting a call, vehicle noise from the the Bluetooth unit's Noise Suppression This does not indicate a problem with the other party can be heard. function requires time to adapt to the call device.

  • Page 60: Navigation

    NAVIGATION Navigation Menu : Adds a destination. Select your destination by entering an address or You can reach all parts of the navigation selecting a POI (point of interest), a Before Using The system from the Navigation menu. location on the map or one of your Navigation System Favorite destinations.

  • Page 61: On The Screen

    Buttons And Other Controls On The Screen Using Keyboards You only need to enter letters or numbers when you cannot avoid it. You can type with your fingertips on the full-screen keyboards and you can switch between various keyboard layouts, for example English, Greek or numerical. Task Instruction Select...

  • Page 62: Press And Hold

    Press And Hold You usually need to select the screen only once, however, some useful features can be accessed with combined touch screen selecting. Those are as follows: Action Button(s) Detail Touching the button on the map screen once changes the scale in one step. Continuously touching the button changes the scale sequentially.

  • Page 63: Map Screen

    Map Screen 3. Select the destination from the map Field Description (see “Selecting A Map Location As Navigation On The Map The Destination”). Speed Shows the speed limit of The data fields are different when you Limiter the current road if the map When a map location is selected, the are navigating an active route and when Symbol...
  • Page 64 Turn Preview And Next Street Lane Information and Signposts Icon Description When navigating a route, the top When navigating on multilane roads, it section of the Map screen shows is important to take the appropriate lane Turn Left information about the next maneuver, in order to follow the recommended street or town.
  • Page 65 When navigating a route, only the signpost that points to the lane(s) to be taken is displayed in bright colors; all others are darker. All signposts and lane guidance arrows are displayed in vivid colors while driving (when there is no recommended route).
  • Page 66 Elements Of The Active Route The navigation system shows the route in the following way: Symbol Name Description If there is a road close by, a blue-colored arrow symbol moves to the road which is the closest. The red mark present around a Current Car Position Marker blue-colored arrow symbol indicates the correct GPS information.

  • Page 67: Manipulating The Map

    Manipulating The Map In addition, the map operation button is displayed, and by touching each of By touching and dragging any part of the buttons, you can zoom in and out the map screen, it can be moved to of maps, change the map perspective a location close to the currently and select a destination.
  • Page 68 Action Button(s) Description Changes the horizontal view angle of the map. Select the button once to modify the Rotating Left And Right view in large steps, or select and hold the button to modify it continuously and smoothly. The direction of the compass shows North. Select the button to switch to North-up view, Compass and then select again to rotate the map in...

  • Page 69: On-Road Navigation

    Action Button(s) Description Rotate Mode Rotates maps. You can change the angle of perspective on Perspective Angle Mode a map. On-Road Navigation Selecting The Check The Details Of The Current Destination Of A Route Position (Where Am I?) You can set up your route in different The navigation system offers you This screen contains information about ways.

  • Page 70: An Address

    Entering An Address Or A Part Of An Address If you know at least a part of the address, it is the quickest way to select the destination of the route. Using the same screen, you can find an address by entering: Destination address GUID-310001-high.tif The center of a town...
  • Page 71 E If the desired name does not show 6. Enter the house number: Note: up, the names that match the string A Select House Number. Places Nearby: you can search for appear in a list after entering a POI (point of interest) around the B Enter the house number on the couple of characters (to open the list selected location.
  • Page 72 Entering The Midpoint Of A Street As The Destination You can navigate to the midpoint of a street if the house number is not available: 1. Select after selecting on the MAP screen. 2. Select Find Address. GUID-310001A-high.tif 3. If necessary, modify the country and town as described earlier (see “Entering 6.
  • Page 73 Note: Selecting An Intersection As The Destination Places Nearby: you can search for POI (point of interest) around the To enter an address as the destination, selected location. do as follows: Add to Favorites: the selected 1. Select after selecting on the MAP location can be registered to Favorites screen.
  • Page 74 C In case of a longer street, the 6. The selected location is shown on keyboard screen appears. Start the map. The system transitions to the entering the name of the intersecting next screen by selecting Navigate To, or street on the keyboard. As soon as it returns to the previous screen by the street names that match the selecting the button.

  • Page 75: Selecting The Destination From The Poi (Point Of Interest)

    Note: Using the same screen, you can find a POI (point of interest) in different ways: Places Nearby: you can search for POI (point of interest) around the You can quickly find a nearby POI selected location. (point of interest) by its name using the Quick search feature;...
  • Page 76 the location displayed on the screen, you can change the destination to anywhere on the map. Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected GUID-310011-high.tif GUID-310013-high.tif location can be registered to Favorites. 7.
  • Page 77 Searching For Help Nearby Note: Places Nearby: you can search for The Preset search feature lets you POI (point of interest) around the quickly find the most frequently selected location. selected types of Places. 1. Select after selecting on the MAP Add to Favorites: the selected screen, or select Find Places after location can be registered to Favorites.
  • Page 78 C Select Area. D Select the area around which the Place should be searched for: Select Find Places to search around the current position or if it is not available, around the last know position (the result list will be ordered by the distance from this position).
  • Page 79 H Sometimes the list of brands in the J The selected location is shown on K Navigation starts if Start is selected, selected Place subcategory the map. The system transitions or after ten seconds of no user appears. Select one brand or select to the next screen by selecting interaction.
  • Page 80 4. Select the area around which the Place should be searched for: Select Around Here to search around the current position or if it is not available, around the last know position (the result list will be ordered by the distance from this position).

  • Page 81: Local Search (Only Some Countries And Region)

    GUID-310204-high.tif GUID-310016-high.tif GUID-310008-high.tif 9. Using the keyboard, start entering the 11. The selected location is shown on Searching For A Place Using Local Search name of the Place. the map. The system transitions to the (Only Some Countries next screen by selecting Navigate To, or And Region) it returns to the previous screen by If you have an Internet connection, you...
  • Page 82 GUID-310025-high.tif GUID-310007-high.tif GUID-310008-high.tif 4. After entering the text, select the Note: Selecting A Map Location As check mark to open the list of results: The Destination Places Nearby: you can search for POI (point of interest) around the 1. Touch anywhere on the map. selected location.
  • Page 83 Note: Places Nearby: you can search for POI (point of interest) around the selected location. Add to Favorites: the selected location can be registered to Favorites. 5. Navigation starts if Start is selected, or after ten seconds of no user GUID-310028-high.tif interaction.
  • Page 84 Note: Entering The Coordinates Of 4. When finished, select The Destination Places Nearby: you can search for POI (point of interest) around the You can also select a destination by selected location. entering its coordinates as follows: Add to Favorites: the selected 1.
  • Page 85 GUID-310007-high.tif GUID-310008-high.tif Note: Check Route Parameters And Accessing Route Related Func- Places Nearby: you can search for tions POI (point of interest) around the selected location. You can check different parameters of the route recommended by the Add to Favorites: the selected navigation system.
  • Page 86 Editing the list of destinations (Edit Route) You can edit the route by modifying the list of destinations. 1. Select after selecting on the MAP screen. GUID-OVERVIEW-high.tif 2. Select Edit Route. Select Avoid to bypass a part of GUID-330001-high.tif the route. Select Cancel Route to delete the Select New Route to plan a new active route.
  • Page 87 : move the selected destination or waypoint rearward one by one. GUID-330005-high.tif GUID-330007-high.tif 3. The four route alternatives are 5. Select one of the route alternatives or GUID-330003-high.tif displayed next to the selected route select to return to the previous planning method.
  • Page 88 The navigation system Saving A Location As A Favorite includes ferries in a planned route Destination by default. However, a map does not You can add any location to Favorites, necessarily contain information about the list of frequently used destinations. the accessibility of temporary ferries.
  • Page 89 Editing The Details Of A Favorite Add from Contact: register an Reference Guide address registered to the contacts list. Destination Smart Zone Move: switch the Favorites order. You can select a location that you have Smart Zoom provides much more than already saved as a Favorite and edit Delete: delete the registered just a usual automatic zoom feature:...
  • Page 90 – Economical: this method combines automatically recalculates the route if Always: the type of the alert point, its the merits of the Fast and Short you deviate from the proposed itinerary distance, and the related speed limit routes. The navigation system or if a newly received Traffic event appear on the Map screen while you makes a calculation for the Fast...
  • Page 91 Traffic Information In Route Traffic Message Channel (TMC) Planning — If Equipped TMC (Traffic Message Channel) can provide your navigation system with the The recommended route is not always real-time status of the traffic. Route the same between two points. Offline calculation can avoid road blocks historical traffic information (historical or unexpected traffic jams caused by...
  • Page 92 fine-tune this recalculation, you can set 3. Select the category. the minimum delay that can trigger a route recalculation, or you can instruct the navigation system to have you confirm the new recommended route before it takes effect. You can do these in Traffic Settings.
  • Page 93 To fine-tune this recalculation, you can 3. Select the traffic category you are Setting Menu set the minimum delay that can trigger a interested in, or select to see the list of You can configure the program settings, route recalculation, or you can instruct all events.
  • Page 94 Guidance Setting Button Descriptions Guidance Vol. The guidance audio volume can be changed during route guidance. Warning Settings Button Descriptions The following alert types are available: Off: No display and sound Visual Only: Only display Speeding Audio and Visual: Both sound and display If the guidance volume is set to 0, the speed limit notification is also 0 because it is part of the guidance The speed limit warning display can be changed.
  • Page 95 Traffic Settings Button Description Use this switch to enable or disable historical traffic data and traffic patterns. This locally stored information can be very useful in normal Use Historical Traffic Data circumstances but for example on public holidays it may be better to turn off in order not to take into account normal weekday traffic jams.
  • Page 96 Route Settings Button Description The route calculation can be optimized for different situations. See Route Calculation Method below for details. You might need to avoid expressway if you are towing another Expressway vehicle. Charge roads are pay roads where you can purchase a pass or Period Charge vignette to use the road for a longer period of time.
  • Page 97 Map Settings The map is always shown on the screen so that you can see the effect You can fine-tune the appearance of when you change a setting. Scroll the Map screen, adjust the map view to the screen downward to display the your needs, show or suppress 3D setting behind the lower part of the buildings, and manage Place visibility...
  • Page 98 Button Descriptions Select which Places to show on the map while navigating. Too many Places make the map crowded, so it is a good idea to show as few as possible. You have the following possibilities: Place Markers Select the check box to show or hide the Place category. Select the name of the Place category to open the list of its subcategories.

  • Page 99: Glossary

    GLOSSARY GPS Accuracy North-Up Map Orientation Several factors have impact on the In North-up mode the map is rotated so Active Route deviation between your real position its top always faces North. This is the The currently navigated route. and the one given by the GPS device. orientation for example in Find on Map.

  • Page 100: End-User Terms

    END-USER TERMS Route Terms and Conditions A sequence of maneuver (for example, Personal Use Only: You agree to use The data is provided for your personal, turns and roundabouts) to reach the this Data together with VISTEON’s CMU internal use only and not for resale. It destination.
  • Page 101 limitation cellular phones, palmtop and Disclaimer of Warranty: VISTEON INFORMATION, OR THE BREACH OF handheld computers, pagers, and AND ITS LICENSORS (INCLUDING THESE TERMS OR CONDITIONS, personal digital assistants or PDAs. WHETHER IN AN ACTION IN CON- THEIR LICENSORS AND SUPPLIERS) TRACT OR TORT OR BASED ON A DISCLAIM ANY WARRANTIES, Note: The Data may contain inaccurate...
  • Page 102 Entire Agreement: Government End Users: This Data is a commercial item as These terms If the defined in FAR 2.101 and is subject to and conditions constitute the entire Data is being acquired by or on behalf these End-User Terms under which this agreement between VISTEON (and its of the United States government or any Data was provided.
  • Page 103 18C7-526-AA FIAT ® 124 SPIDER First Edition © 2017 FCA US LLC. All Rights Reserved. FIAT is a registered trademark of Radio Book FCA Group Marketing S.p.A., used under license by FCA US LLC.

Table of Contents