Selecting A Cd; Track Selection; Fast Forward/Backward; Scan Function - Fiat Bravo Soundsystem Manual

SELECTING A CD

Press button 1 CD + to select the next
CD and button 2 CD – to select the pre-
vious CD.
If the loader does not contain a disc in the
position selected, the display shows "NO
CD", and the next CD will be played au-
tomatically.

TRACK SELECTION

(forward/backward)
Press briefly button Í to play the next
track contained in the Compact Disc be-
ing played.
Press briefly button È to play the previ-
ous track contained in the Compact Disc
being played.
34

FAST FORWARD/BACKWARD

Keep button Í pressed to move the track
selected fast forward and keep button È
pressed to move it fast backward. Fast for-
ward/backward is stopped when the but-
ton is released.

SCAN FUNCTION

(scanning CD tracks)
With this function it is possible to listen to
all the tracks contained in the CD select-
ed.
Keep button SCAN pressed to play the
first 10 seconds of each track contained in
the CD. While playing the track, the dis-
play will alternately show the CD Chang-
er function selected (CD Changer name,
track playing time and number of the track
being played) and the word "SCAN" (e.g.:
"CDC3 SCAN TK12 0.04")
If the Scan function is on, Repeat and Mix
functions are turned off.
The scanning sequence is the following:
– from the track being played up to the
last one on the CD
– from the first track up to the one being
played when the scan function was start-
ed.
The Scan function is interrupted in the fol-
lowing cases:
– turning the sound system off
– pressing the SCAN button again to con-
tinue listening to the track being played
– pressing Í or È thereby moving to the
next or previous track
– pressing a preset button
– changing the sound source
– pressing the MENU button.
RDS
If the Scan function is not interrupted, at
the end it will continue playing the track
played before scanning was started.