Broadcast Priority Between Equipment With The Equal Priority Level; Priority Mode Between Equipment With The Equal Priority Level - Toa VM-2120 Instruction Manual

11.2. Broadcast Priority between Equipment with the Equal Priority Level

11.2.1. Priority mode between equipment with the equal priority level

The following 3 priority modes are made available, which can be set using the unit's internal SW2-No. 8 and
SW3-No. 1 switches.
(1) Last-come-first-served priority (factory-preset mode)
The latest broadcast takes precedence, with the earlier broadcast interrupted.
Broadcast source 1
(Made a broadcast first.)
Broadcast source 2
(Made a broadcast last.)
(2) First-come-first-served priority
Current broadcast is given priority, and other broadcasts cannot be made.
Broadcast source 1
(Made a broadcast first.)
Broadcast source 2
(Made a broadcast last.)
(3) Unit number priority (numerical order)
Assign the unit number to the following broadcast sound sources so they can be broadcast in numerical
order.
(A)Remote Microphone (No. 1 – 4)
(B)EV-200M message (No. 1 – 5)
Figure below shows an example for the priority operation between Remote microphones No. 2 and No. 3.
Remote microphone
No. 3 (Made a broadcast first.)
Remote microphone
No. 2 (Made a broadcast last.)
Zone 1
Zone 2
Zone 3
Zone 4
: Broadcast possible
Zone 1
Zone 2
Zone 3
Zone 4
Zone 1
Zone 2
Zone 3
Zone 4
Remote microphone
No. 2 (Made a broadcast first.)
Remote microphone
No. 3 (Made a broadcast last.)
: Broadcast impossible or interrupted
: Broadcast possible
: Broadcast interrupted
: Broadcast possible
: Broadcast impossible
Zone 1
Zone 2
Zone 3
Zone 4
27