SOLENOID #1
3. Reassembly
To reassemble and reinstall the Shutter Assembly, follow the disassembly and removal
steps in reverse order.
Note: When re-installing the Far Focus Lens make sure its pin is inserted into the locating tab at
the end of the plunger of solenoid # 2. (See insert in Figure 4-33.)
PC BOARD
Figure 4-34. Removal of PC Board
BLADES
Figure 4-35. Removal of Blades and Solenoid #1
4 - 27
LENS
MOUNTING
PLATE
LENS
MOUNTING
PLATE