Polaroid Joshua Vision Service Manual page 91

d. Using a narrow blade flat screwdriver or a dental pick, pry the bellows retainer tabs (two
places) (Figure 4-20) out and then release the VMC/Bellows Assembly from the Shutter
Assembly .
BELLOWS
RETAINER
TAB
GRIP FLASH
WITH HAND
BELLOWS
LOCKING
TAB
Figure 4-20. Disconnect VMC/Bellows Assembly from Shutter Assembly
e. Manually retract VMC/Bellows Assembly (Rubber Bellows) to access back of Shutter
Assembly.
Note: If necessary, straighten the Bellows locking tabs with tweezers or needlenose pliers.
f. Place the Shutter Assembly into the Shutter Support Fixture (Figure 4-21).
g. Using a narrow blade flat screwdriver, gently push in the slot of the Flex Connector Cap to
release its locking tab. A snap sound occurs indicating that it is unlocked.
FLEX
CONNECTOR
CAP
SHUTTER SUPPORT
FIXTURE #13556
Figure 4-21. Release (Unsnap) Flex Connector from Shutter
FLEX
4 - 19
SHUTTER
ASSEMBLY
BELLOWS
RETAINER
TABS
BELLOWS
LOCKING
TAB
BELLOWS
SHUTTER
ASSEMBLY