Shutter Assembly
1. Removal
a. Using a narrow blade flat screwdriver, push aside the end of the rubber Flapper to access the
Shutter Link pin (Figure 4-18) and then push the pin out.
b. Using needlenose pliers, pull out the Shutter Link pin to release the top portion of the
Shutter Link from the Shutter Assembly.
END OF FLAPPER
c. Using a solder aid stick, gently pry up the corner of the Shutter Decorative Plate
(Figure 4-19) to release it from the Shutter Assembly. Lift off the Shutter Decorative Plate.
SHUTTER
DECORATIVE
PLATE
.
LINK PIN
Figure 4-18. Removal of Shutter Link Pin
Figure 4-19. Removal of Shutter Decorative Plate
4 - 18
RUBBER FLAPPER
SOLDER AID
TOOL
SNAP
REMOVE