Disassembly; Reassembly; Right Hand Grip - Polaroid Joshua Vision Service Manual

Right Hand Grip

1. Disassembly (Figure 4-7)
a. Open the Picture Removal Door to expose the Right Hand Grip holding screw.
b. Using a square drive, remove the screw that secures the Right Hand Grip to the Main Body of
the camera. Lift out the Right Hand Grip.
c. Pull out the S1 Button.
ACTUATOR TAB

2. Reassembly

To reassemble the Right Hand Grip and S1 Button, follow the disassembly steps in reverse order.
Note: When re-installing the Right Hand Grip and S1 Button make sure the S1 Button: (See insert
in Figure 4-7)
• Actuator tab is properly inserted into its locating slot on the Main Body of the camera.
• S1 Button is properly placed on its support post on the Main Body of the camera.
S1 BUTTON
POST
ACTUATOR TAB
Figure 4-7. Disassembly of Right Hand Grip
4 - 11
RIGHT HAND
GRIP
PICTURE
REMOVAL
DOOR
S1 BUTTON