Polaroid Joshua Vision Service Manual page 114

3. Focusing Test
Aim Camera at Object Exactly
5 Feet (1.5m) from Lens.
Press Shutter Button.
Aim Camera at Object Exactly
10 Feet (3.0m) from Lens.
Press Shutter Button.
4. Self-Timer Test
Slide Self-Timer Button
toward Symbol of Clock
5. End of Pack Test
Press Shutter Button
Press Shutter Button
If test 1 through 5 in the Check List are satisfactory, make a visual check of the Camera:
• Check viewfinder and lens for cleanliness.
• Check that structural parts are not scratched.
• Check that moving parts don't bind.
Check resulting photo for sharp focus.
Camera counter should now display 3.
Check resulting photo for sharp focus.
Camera counter should now display 2.
Red LED's on back of strobe tower and on front of
Camera blink and beeper sounds, both at faster rate
during a 12-second countdown period.
Flash fires.
Camera cycles, blades open and close, motor runs.
Counter indexes from 2 to 1.
Red LED lights (flash is charging), then goes out.
Green LED lights and stays on (flash is ready).
Film frame is moved into storage chamber.
Flash fires.
Camera cycles, blades open/close.
Counter indexes from 1 to 0.
Film frame is moved into storage chamber.
Red LED on strobe tower will flash twice.
Audible signal will sound four times to signal empty
film pack.
Red LED will flash and two-tone beep will sound
four times, signalling you to remove 10 pictures and
the dark slide from the storage chamber.
Note: The camera will not operate when storage
chamber is full. This may occur with 9, 10
or 11 pictures in chamber (due to film
thickness variations).
5 - 6