Download Print this page

Basic Playback - Mitsubishi Electric DX-TL2500E How To Use Manual

Hide thumbs

Advertisement

Mitsubishi Digital Recorder - How to Guide

Basic Playback

Note: While you are in the PLAYBACK mode the DVR will continue to record.
Step 1.
To enter the PLAYBACK mode.
Open the front panel, and on the far right you will see four buttons:
STOP, PAUSE, REV.PLAY(-) and PLAY.
To playback a recorded time period - press the [
Playback will begin from the earliest recorded memory, and will appear in reverse mode. Depending on
how the recorder is set up, some camera images may not appear at first.
Step 2.
You will now need to select the desired LAYOUT VIEW.
For a SINGLE CAMERA press an individual camera button (1.)
For MULTIPLE CAMERAS press the [
button until the desired camera view combination appears.
Step 3.
Once you have selected your desired layout view, you can now REWIND or FFWD from the recorded
time shown.
To rewind - turn the [
Note the further the dial is turned, the faster the rewind speed.
An increase in speed is acknowledged by a short beep.
To FAST-FORWARD - turn the [
Note the further the dial is turned, the faster the forward speed. An increase in speed is acknowledged by a short beep.
Depending on the way the recorder is set up, some images will appear on playback, but will not appear
when searching in FFWD or REW mode. To find a specific time and date, refer to the Advanced Search
instructions.
Step 4.
Once the [
SHUTTLE RING
Step 5.
Now that you have found the period of recorded time that you wish to view, you
can either PLAY Forward or Backwards from that point in time.
Note: You must be in the PAUSE mode first before either of the following.
To PLAY FORWARD - press the [
To PLAY BACKWARDS - press the [
Step 6.
To PAUSE your viewing - press the
[
PAUSE
] button.
Step 7.
If you need to MOVE FRAME BY FRAME - press the [
To FRAME ADVANCE - turn the [
To FRAME REWIND - turn the [
Step 8.
Once you have finished playback you can return to the
LIVE RECORDING SCREEN by pressing the [
Step 9.
To RESUME PLAYBACK after the [
as per (Step 1.).
Note: Playback will resume from the last playback time period. If you need to Fast-forward or Rewind to a
new time then follow (Step 3.). To go to the start or end of any recorded time you will need to use the
SEARCH function, please refer to the "Searching" Guide.
SPLIT/SEQUENCE
SHUTTLE RING
] anticlockwise (to the left) and hold.
SHUTTLE RING
] is released - the recorder will go into PAUSE mode.
PLAY(+)
] button.
PAUSE
] then the [
JOG DIAL
] clockwise (to the right).
JOG DIAL
] anticlockwise (to the left).
STOP
] button has been pressed - press the [
Page 1
REV. PLAY(-)
] button.
]
] clockwise (to the right) and hold.
REV. PLAY(-)
PAUSE
] button, then
STOP
] button.
] button.
REV. PLAY(-)
] button

Advertisement

loading

  Related Manuals for Mitsubishi Electric DX-TL2500E

This manual is also suitable for:

Dx-tl950e250Dx-tl800e120