Mitsubishi Electric DX-TL2500E How To Use Manual page 7

Mitsubishi Digital Recorder - How to Guide
Copying to CD-WRITER:
Step 1. Please make sure a CD-Writer is connected properly to the SCSI port on
the rear of the DVR.
If not, please contact your installer.
Step 2. Press the [ COPY
A menu will appear on screen. Make sure the
DVR DIRECTION is set to HDD to COPY.
If not; use the [ SHUTTLE RING
Step 3. Choose the MODE - whether you want to overwrite or start recording
from the last entry on the CD media. The default setting is OVERWRITE.
OVERWRITE: Overwrites current data on CD Media.
NO OVERWRITE: Writes following last entry on CD Media.
Step 4. Select the desired TRANSFER PERIOD using the [
START-END - selects the recording start and end time/date. The recorder
will copy all data from the HDD between these times/dates.
START - selects the recording start time/date only. The recorder will copy
all data from the HDD from this start time/date
LATEST DATA - starts copying from the end of the last recording on the
CD-ROM, if sufficient memory is available.
Step 5. Select the desired START or START/END time using the
[ JOG / SHUTTLE
Step 6. Select EXECUTE using the [
the [ SHUTTLE RING
If the copy operation does not start, turn the [
anticlockwise or press the COPY button on the DVR.
] button on the front of the DVR.
] ring to set correctly.
].
JOG DIAL ] then turn
] clockwise to start copying.
JOG / SHUTTLE
SHUTTLE RING ]
Page 6
]