Table of Contents
Advertisement
UT035AH EN.fm Page 10 Thursday, June 26, 2008 12:45 PM
Note:
- Pressing the PTT key in Room Monitor mode is invalid and
the radio emits PTT Error Tone.
- When the voice/noise in another room continues more than
60 seconds, the monitoring radio stops monitoring for 5
second, and resumes.
Transmitting a Call Tone
Your TLKR T7 radio is equipped with 10 selectable call
tones that will be transmitted when the
Normal Mode.
To select a call tone:
1. Enter Common Menu and select "TONE". Then press
key.
SEL/
The current call tone number (1-10) blinks.
2. Press the
or
key to choose the number of the
desired call tone. Each tone will be heard through the
speaker.
3. Exit the Common Menu.
To transmit the selected call tone, press the
mal Mode. The selected tone will automatically be transmit-
ted for a fixed length of time. Call tone will be cancelled
when the PTT key is pressed.
10
Silent Mode
When you turn on the silent mode, all incoming calls are
muted: the radio blinks the backlight to alert you to an
incoming call.
If you do not respond to the call, the backlight turns off, and
the CALL icon will blink until there is no signal.
The TLKR T7 will also vibrate to remind you that you
missed a call.
Silent mode is disabled for 15 seconds when you transmit,
receive, or press any other button.
key is pressed in
To set the silent mode:
1. Enter the Common Menu and select "SLNT". Then press
key.
SEL/
2. Press the
to set Silent Mode to On. The Channel
Indicator shows "Y" and SILENT icon appears.
3. Press the
to set Silent Mode to Off. The Channel
Indicator shows "N" and SILENT icon disappears.
key in Nor-
Advertisement
Table of Contents
