Table of Contents
Advertisement
UT035AH EN.fm Page 14 Thursday, June 26, 2008 12:45 PM
Set Group Mode
Press the SEL/
key to control Group Mode. Choose "Y"
or "N" by pressing the
or
key.
See LCD:
Choose "N" and press the SEL/
Menu.
Choose "Y" and press the SEL/
and Group Code setting.
Set Group Code
Group code is selectable from 0 - 121.
Sub-code segments indicate Group code.
To select a group code, press the
choose the Group code.
Press the SEL/
key to complete the Group Code setting.
The radio enters "Ring Tone Setting Menu".
Press MENU/GRP key to go back to Group Menu.
Set Ring Tone
The user can select Ring Tone for a Direct Call.
There are 10 Ring Tones, these Ring Tones are the same
as Call Tones.
To select a Ring Tone, press the
14
The selected Ring Tone sounds from speaker.
Set ID
Each radio in your group needs to be set to an ID number
from 1 to 16.
The ID number requires to distinguish a unit of the same
Group.
The user can set an ID name of up to 4 characters.
The user selects ID number that is displayed on Channel
segments by pressing the
When the registered ID of All Call is selected by
key, the LCD indicates "USED" at Sub-code segments, and
if non registered ID is selected, it indicates nothing at Sub-
code segments.
key to exit from Group
key to go to Group Menu
key or
key to
See LCD:
Press the SEL/
Set ID Name
ID name appears on other units' displays when you make
an All Call or Direct Call. This is also the name that appears
on other radio displays when someone wants to make a
Direct Call to you. When no ID Name is set, the unit number
appears.
Press the
key or
key.
blinking sub code segments.
key or
key.
or
key to advance to the setting ID Name.
key or
key to select a character on the
Advertisement
Table of Contents
